New product
Brand Name: Nfc Pass, Nfc Pass Model Number: CR0385 Product Name: Nfc card reader Interface: RS232 or TTL232 Frequency: 13.56MHz Protocol: ISO14443A B Voltage: 2.5V--5V
Warning: Last items in stock!
Availability date:
Power supply | 2.5V--5V, 80-105mA |
After dormancy current | 12UA |
Interface | RS232 or TTL232 |
Transmission speed | Default 19200 bps |
Storage temperature | -40 ºC ~ +85 ºC |
Operating temperature | 0 ºC ~ +70 ºC |
Standard | ISO14443A ISO14443B |
ISO TYPE A/B NFC Module 14443 1k/4K Ntag203 Ntag213 Ntag215 Ntag216 Ultralight C | |
R/W distance of up to 60mm (up to 100mm with bigger antenna size), depending on TAG |
Communication setting:
The communication protocol is byte oriented.
Both sending and receiving bytes are in hexadecimal format.
The communication parameters are as follows,
Core
ARM® Cortex®-M0 core running up to 50 MHz
One 24-bit system timer
Supports low power Idle mode
A single-cycle 32-bit hardware multiplier
NVIC for the 32 interrupt inputs, each with 4-level of priority
Supports Serial Wire Debug (SWD) interface and two watchpoints/four breakpoints
Built-in LDO for wide operating voltage: 2.5V to 5.5V
Memory
32 KB Flash memory for program memory (APROM)
Configurable Flash memory for data memory (Data Flash)
2.5 KB Flash for loader (LDROM)
4 KB SRAM for internal scratch-pad RAM (SRAM)
Baud rate: 19200 bps ~115200
Data: 8 bits
Stop: 1 bit
Parity: None
Flow control: None